样品说明：本公司可免费提供所有产品样品，如有需要，请联系客服索取！

特点：经济型消泡剂，不含硅树脂，矿物油，具有优异的消泡性能和兼容性。非常适合于多种水性涂料和粘合剂体系。

产品说明书：

D-FOAM-R A625

D-FOAM-R A625 is an economical, water base foam control additive for water borne inks, coatings and adhesives.  It provides easy incorporation and excellent performance with a wide range of binder systems including starch, polyvinyl alcohol and polyvinyl acetate.  D-FOAM-R A625 is non-silicone, mineral oil free and has a very low VOC.

Typical Applications:

·         Water Based Inks and Overprint Varnishes

·         Water Borne Coatings and Adhesives

·         Pigment Dispersions

·         Paper Coatings

·         Polyvinyl alcohol and vinyl acetate adhesives

Application Methods:

Typical use concentrations for D-FOAM-R A625 are between 0.1 and 0.5% (on total coating weight).  As with any defoamer, formulators should evaluate a range of concentrations to determine the optimum dose.

Product Characteristics (Typical):

Appearance                                                  Opaque, slightly off-white emulsion

Density                                                    8.24 Lbs/gal.

Specific Gravity                                             0.99

VOC (EPA Method 24)                                        less than 1%

Flash Point (PMCC)                                             Greater than 250˚F

Handling and Storage:

Keep containers closed when not in use.  Protect from freezing.  If frozen, thaw at ‘room temperature’ and mix well before using.  Do not store in close proximity to strong oxidizers.

HMIS Codes:  Health – 1, Flammability – 0, Reactivity – 0, Personal Protection – B

For more complete health, safety and environmental information, please review our material safety data sheet.

These characteristics are for guidance only and are not to be taken as product specifications. The tolerances are given in the product specification sheet. For further information on product properties, toxicological, ecological and safety data, please refer to the safety data sheet.