Product properties*)

Active substance content
About 100 %

Appearance at 25 °C
Yellowish, clear liquid

Density at 25 °C
About 1,1 g/cm³

Viscosity at 25 °C (ISO 6388)
About 15800 mPa•s

Solubility at 25 °C
Soluble in water

pH value (DIN EN 1262), 5 % as is in water
About 3,5

Flash point (DIN/ISO 2592)
242 °C

Use
Dispersogen DIP is a dispersing agent for inorganic
Pigments like titanium dioxide, iron oxide pigments,
China clay, gypsum.

Paints & coatings industry

Dispersing and wetting agent for waterborne paints &
coatings, e.g. emulsion paints, silicate paints, silicon
emulsion paints, polyurethane paints, dosage: 0,5 –
1,5% on pigments

Dispersing agent for inorganic pigment slurries, dosage:
0,5 – 1,5% on pigments

Dispersing agent for pigment pastes and preparations,
dosage: 5 – 25% on pigments

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described on their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
*) These characteristics are for guidance only and are not to be taken as product specifications. The tolerances are given in the product specification sheet. For further information on product properties, toxicological, ecological and safety data, please refer to the safety data sheet.
 
®= registered trademark by Clariant

Page 1/1
January 2008
Version 1.2